Specifications

Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide 3-15
ESG Family Signal Generators Softkey Reference
Option 200 B
BLER
This field displays the block error rate (BLER) in bits, selected for the
transport channel data. The value entered into this field is valid only
when the Err Insert field is set to BLER. The errors are applied to the
transport channel data when the
Apply Channel Setup softkey is
pressed. The numbers of the Error Block, the Total Block, and the
Actual BLER fields are displayed below this field after the errors are
applied to the transport channel data. This data field is on the second
page of the table editor. See “Num of Blk” on page 3-46 for more
information.
Range: 0.000 to 1.000
Default: 0.000 for all Transport Channels
Data Field Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > Config Transport > Transport Channel # 1 to 6 >
TrCH Setup > BLER
Blk Size
This field displays the coding block size of the selected transport
channel. The total input data in one transport channel is the block size
multiplied by the number of blocks.
Range: 0 to 5000
Default (Downlink): 20 for all the transport channels
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > Link Control >
1, 2, 3, or 4 > PhyCH Type > DPCH > PhyCH Setup > Data > Edit Item >
Transport CH > Return > Config Transport > Transport Channel # 1 to 6 >
TrCH Setup > Blk Size
Default (Uplink): 244 for transport channel #1, 96 for transport channel
#2, 20 for transport channels #3, #4, #5, and #6.
Data Field Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > Config Transport >Transport Channel # 1 to 6 >
TrCH Setup > Blk Size
BS Setup
This key accesses a table editor from which you can select and modify
the parameters for the base station (BS). Highlight the data field you
want to change and press the
Edit Item softkey. Press a softkey, use the
numeric keypad or front panel knob to change values contained in the
table and press the appropriate softkey to terminate the entry.
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > BS Setup