Specifications

3-20 Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide
Softkey Reference ESG Family Signal Generators
D Option 200
D
Data
This field displays the data type for a transport and/or physical
channel. Press the
Edit Item key to choose from a list of data types. Data
types available include PN sequences, fixed data, transport channel
data, or user-defined data files. This field appears in several locations.
PhyCH Setup menu
Default (Downlink): PN9
Default (Uplink): Transport CH
Data Field Location (Downlink):
Mode > CDMA > W-CDMA >
Link Control > PhyCH Type > DPCH > PhyCH Setup > Data
Data Field Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > PhyCH Setup > Data
TrCH Setup menu
Default: PN9
Data Field Location (Downlink):
Mode > CDMA > W-CDMA >
Link Control > PhyCH Type > DPCH > PhyCH Setup > Data >
Transport CH > Return > Config Transport > Transport Channel # 1 to 6 >
TrCH setup > Data
Data Field Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > Config Transport >Transport Channel # 1 to 6 >
TrCH Setup > Data
Define User FIR
This key accesses the FIR Values table editor. You can add or modify
coefficients for a finite impulse response (FIR) filter. The FIR Values
table editor allows a maximum of 1024 coefficients in a file, however,
the signal generator hardware is limited to 256 coefficients, 32 symbols,
and an oversample ratio between 4 and 16.
NOTE If you enter more than 32 symbols, the instrument cannot use the filter.
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > BS Setup >
Filter >
Edit Item > Define User FIR
Softkey Location (Uplink): Mode > CDMA > W-CDMA > Link Up >
UE Setup > Filter > Edit Item > Define User FIR