Specifications

Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide 3-55
ESG Family Signal Generators Softkey Reference
Option 200 R
R
Rate Match Attr
This field displays the rate matching attribute value for the selected
transport channel. Press
Edit Item to enter a value and terminate with
the
Enter softkey to set the value. A higher RMatch attribute number
indicates more data for the channel and allows for a higher puncture
percentage.
Range: 1 to 256
Default: 1 for all Transport Channels
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > Link Control >
PhyCh Type > DPCH > PhyCH Setup > Data > Edit Item > Transport CH >
Return > Config Transport > Transport Channel # 1 to 6 > TrCH Setup >
Rate Match Attr
Data Field Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > Config Transport >Transport Channel # 1 to 6 >
TrCH Setup > Rate Match Attr
Rectangle
This key selects a one-symbol-wide rectangle filter in either the Select
(Filter) menu or the Load Default FIR menu.
Select Menu
This key selects a rectangle FIR filter for use in the filter setup.
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > BS Setup >
Filter >
Edit Item > Select > Rectangle
Softkey Location (Uplink): Mode > CDMA > W-CDMA > Link Up >
UE Setup > Filter > Edit Item > Select > Rectangle
Load Default FIR Menu
This key followed by
Generate loads the FIR table editor with coefficient
values for a rectangle filter. The
Display Impulse Response and
Display FFT softkeys in this menu graphically display the filter response
as defined in the FIR table editor.
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > BS Setup >
Filter >
Edit Item > Define User FIR > Load Default FIR > Rectangle
Softkey Location (Uplink): Mode > CDMA > W-CDMA > Link Up >
UE Setup > Filter > Edit Item > Define User FIR > Load Default FIR >
Rectangle