Specifications

3-56 Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide
Softkey Reference ESG Family Signal Generators
R Option 200
Ref Measure Setup
This key accesses a menu from which you can select a reference
measurement test setup for a physical channel. For downlink, this key
is only available for the dedicated physical channels (DPCH). For
uplink, this key is valid only for physical channel #2 (DPDCH).
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > Link Control >
PhyCH Type > DPCH > Ref Measure Setup
Default (Uplink): RMC 12.2 kbps
Softkey Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > Ref Measure Setup
Rename
This key accesses a menu from which you can rename the selected file.
Rename is located in table editor menus under the Edit File or
Create File softkeys.
Softkey Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 1 > PhyCH Type > DPCCH > PhyCH Setup > FBI Pattern >
Edit Item > User File > Edit File or Create File > Rename
Restore Default Filter
This key replaces the current FIR filter with the default filter.
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > BS Setup >
Filter >
Edit Item > Restore Default Filter
Softkey Location (Uplink): Mode > CDMA > W-CDMA > Link Up >
UE Setup > Filter > Edit Item > Restore Default Filter
RMC 12.2 kbps (25.141 v3.4)
This key sets the uplink reference measurement channel (RMC) test
setup rate to 12.2 kbps as described in the 3GPP Technical
Specification (TS 25.141 V3.4).
Softkey Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > Ref Measure Setup > RMC 12.2 kbps (25.141 v3.4)