Specifications

3-68 Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide
Softkey Reference ESG Family Signal Generators
T Option 200
TPC Pat Trig Off On
This key sets the pattern trigger state of the transmit power control
(TPC) for the uplink dedicated physical control channel (DPCCH).
Default: Off
Softkey Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 1 > PhyCH Setup > TPC Pat Trig Off On
TPC Pat Trig Polarity Neg Pos
This key sets the pattern trigger polarity of the transmit power control
(TPC) for the uplink dedicated physical control channel (DPCCH). The
choices are: Positive (
Pos) edge or Negative (Neg) edge.
Default: Positive
Softkey Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 1 > PhyCH Setup > TPC Pat Trig Polarity Neg Pos
TPC Pattern
This field displays the power control command format in use. The
TPC Pattern is used to change the user equipment (UE) or the base
station (BS) power level. Press the
Edit Item key to select the power
format for the transmit power control (TPC). For uplink, the TPC
pattern has a number of different formats (see “Select Pattern”
on page 3-60 for more information). For downlink, the pattern is limited
to four formats.
Default: Up/Down
Data Field Location (Downlink):
Mode > CDMA > W-CDMA >
Link Control > PhyCH Type > DPCH > PhyCH Setup > TPC Pattern
Data Field Location (Uplink):
Mode > CDMA > W-CDMA > Link Up >
Link Control > 1 > PhyCH Type > DPCCH > PhyCH Setup > TPC Pattern
Transport CH
This key selects the transport channel to be configured as data for the
selected dedicated physical channel. In uplink mode this key is active
only with physical channel #2.
Softkey Location (Downlink):
Mode > CDMA > W-CDMA > Link Control >
PhyCH Type > DPCH > PhyCH Setup > Data > Edit Item > Transport CH
Softkey Location (Uplink): Mode > CDMA > W-CDMA > Link Up >
Link Control > 2 > PhyCH Setup > Data > Edit Item > Transport CH