Specifications

Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide 5-5
ESG Family Signal Generators Remote Programming and Examples
Option 200 W-CDMA Subsystem SCPI Command Reference
Reference Measurement Channel
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:DLINk:RCSetup REF122|REF64|REF144|
REF384|AMR122|UDI64|ISDN
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:DLINk:RCSetup?
This command configures the downlink reference measurement setup. The following
choices are available:
REF122 Reference Measurement Channel 12.2 kbps (25.101 V3.3)
REF64 Reference Measurement Channel 64.0 kbps (25.101 V3.3)
REF144 Reference Measurement Channel 144.0 kbps (25.101 V3.3)
REF384 Reference Measurement Channel 384.0 kbps (25.101 V3.3)
AMR122 Adaptive Multiple Rate 12.2 kbps (25.944 V3.0)
UDI64 Unrestricted Digital Information 1B 64.0 kbps (25.944 V3.0)
ISDN ISDN Unrestricted Digital Information. Configures transport channel
1 to carry four blocks of 640 and transport channel 2 to carry one block
of 148.
*RST: REF122
Scramble Code
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:DLINk:SCRamblecode <0 to 511>
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:DLINk:SCRamblecode?
This command selects the scramble code number to be used.
Range: 0 to 511
*RST: 0
CPICH Setup
Power Level
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:DLINk:CPICh:POWer <
−
40.00 to 0.00dB>
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:DLINk:CPICh:POWer?
This command sets the power level for this channel.
*RST: 0.00 dB
State
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:DLINk:CPICh[:STATe] ON|OFF|1|0
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:DLINk:CPICh[:STATe]?
This command turns the CPICH channel on or off. The CPICH channel type will be
activated on channel 4 with the ON[1] command.
*RST: Off (0)