Specifications

5-18 Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide

Remote Programming and Examples ESG Family Signal Generators

W-CDMA Subsystem SCPI Command Reference Option 200

Uplink SCPI Commands

External Clock Rate Multiplier

[:SOURce]:RADio:WCDMa:TGPP[:BBG]:BBCLock:EXT:RATE X1|X2|X4

[:SOURce]:RADio:WCDMa:TGPP[:BBG]:BBCLock:EXT:RATE?

This command sets the external clock rate for the baseband generator. The choices are

2, or

X1 3.84 MHz external clock

X2 7.68 MHz external clock

X4 15.36 MHz external clock

*RST:

DPCCH Setup

Channel Code

[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:DPCCh:CCODe <0 to 255>

[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:DPCCh:CCODe?

This command sets the channel code for the uplink dedicated physical control channel. The

maximum value is dependent on the symbol rate.

Range: 0 to 255

*RST: 0

Channel Power Control

[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:DPCCh:POWer <

−

40.00 to 0.00dB>

[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:DPCCh:POWer?

This command sets the power level for the uplink dedicated physical control channel

(DPCCH).

*RST:

−

2.69 dB

Channel State

[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:DPCCh[:STATe] ON|OFF|1|0

[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:DPCCh[:STATe]?

This command sets the operating state for the uplink dedicated physical control channel

(DPCCH). The choice is on (1) or off (0).

*RST: On (1)