Specifications

5-26 Fully Coded 3GPP W-CDMA Personality User’s and Programming Guide
Remote Programming and Examples ESG Family Signal Generators
W-CDMA Subsystem SCPI Command Reference Option 200
Filter EVM/ACP Optimization (for Nyquist or Root Nyquist)
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:FILTer:CHANnel EVM|ACP
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:FILTer:CHANnel?
This command optimizes a filter for the minimized error vector magnitude (EVM) or for
the minimized adjacent channel power (ACP). This command is effective only after
choosing a root Nyquist or Nyquist filter; it does not effect other types of filters.
*RST: EVM
Scramble Code
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:SCRamblecode <0 to 16777215>
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:SCRamblecode?
This command sets the scramble code.
Range: 0 to 16777215
*RST: 0
DCH Transport Channel Setup
Bit Error Rate
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:DCH[1]|2|3|4|5|6:DATA:BER
[:VALue] <0.0000 to 1.0000>
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:DCH[1]|2|3|4|5|6:DATA:BER[:VALue]?
This command specifies the bit error rate to be applied for the uplink dedicated channel
(DCH) selected.
Range: 0.000 to 1.000
*RST: 0.000
Bit Error Rate Actual Value Query
[:SOURce]:RADio:WCDMa:TGPP[:BBG]:ULINk:DCH[1]|2|3|4|5|6:DATA:BER:ACTual?
This query returns the actual bit error rate value applied to the data for the uplink
dedicated channel (DCH) selected. The actual bit error rate can be different from the
specified bit error rate due to the internal bit generation.
Range: 0.000 to 1.000
*RST: 0.000