Specifications

2-38 Programming Guide
Programming Commands and Examples ESG Family Signal Generators
:MEMory and :MMEMory Subsystems
The signal generator will return the two memory usage parameters and as many file
listings as there are files in the directory list. Each file listing parameter will be in the
following form:
"<file_name>",<file type>,<file size>
The file types are:
• ARBI - a volatile arbitrary waveform generator file (Option UND)
• CDMa - an IS-95 CDMA file (Option UN5)
• DMOD - a digital modulation file
• DWCDma - a downlink W-CDMA file (Option 100, 3GPP V3.4 12-00)
• FCDMa - a forward link cdma2000 file (Option 101)
• FWCDma - a forward link W-CDMA file (Option 100, Rev. 1.0-1.2)
• MCDMa - a multicarrier IS-95 CDMA file (Option UN5)
• MDMod - multicarrier digital modulation file
• MDWCdma - a multicarrier downlink W-CDMA file (Option 100, 3GPP V3.4 12-00)
• MFCDma - a multicarrier forward link cdma2000 file (Option 101)
• MFWCdma - a multicarrier forward link W-CDMA file (Option 100, Rev. 1.0-1.2)
• MTONe - a multitone file
• NVARBI - a non-volatile arbitrary waveform generator file (Option UND)
• RCDMa - a reverse link cdma2000 file (Option 101)
• RWCDma - a reverse link W-CDMA file (Option 100, Rev. 1.0-1.2)
• SEQ - a sequence file
• UWCDma - an uplink W-CDMA file (Option 100, 3GPP V3.4 12-00)
Binary Memory Catalog
:MEMory:CATalog:BINary?
This command outputs a list of the binary files in the “:” directory. The return data will be
in the following form:
<mem used>,<mem free>{,<file listing>}
The signal generator will return the two memory usage parameters and as many file
listings as there are files in the directory list. Each file listing parameter will be in the
following form:
"<file_name>",<file type>,<file size>