Specifications

Programming Guide 2-73
ESG Family Signal Generators Programming Commands and Examples
:SYSTem Subsystem
Screen Saver Mode
:SYSTem:SSAVer:MODE LIGHt|TEXT
:SYSTem:SSAVer:MODE?
This command toggles the screen saver mode the choices are
Light Only and Light & Text.
Screen saver mode is a persistent state; it is not affected by an instrument preset or by a
power cycle. The signal generator is shipped from the factory with this parameter set to
Light Only.
Screen Saver State
:SYSTem:SSAVer:STATe ON|OFF|1|0
:SYSTem:SSAVer:STATe?
This command sets the operating state of the screen saver. The choices are On (1) and
Off (0).
Screen saver state is a persistent state; it is not affected by an instrument preset or by a
power cycle. The signal generator is shipped from the factory with this parameter set to
Off.
System Preset
:SYSTem:PRESet
This command returns the signal generator to a set of defined conditions.