Specifications

2-78 Programming Guide
Programming Commands and Examples ESG Family Signal Generators
GPIB Check, Example Program 1
Program Comments
10 to 150: Title and program description
160: Sets up a variable to contain the GPIB address of the source.
170: Places the signal generator into LOCAL mode.
180: Resets the signal generator’s parser and clears any pending output from the source.
190: Clears the controller’s display.
200: Sets the signal generator to a defined state.
210: Sets the signal generator to REMOTE mode.
220 to 270: Prints messages to the controller’s display.
280: Ends the program.