Specifications
Programming Guide 4-21
ESG Family Signal Generators Softkey/Command Cross-Reference
Agilent 8656/57-Compatible Language
Agilent 8656/57-Compatible Language
The ESG Family Signal Generators have the capability of operating in an
Agilent 8656/57-compatible programming mode. The following table shows the 8656/57
programming codes that are implemented in the signal generator.
Table 20 8656/57-Compatible Programming Codes
8565/57
Command
1
Parameter Comments Status
AM Amplitude Modulation Function Entry Implemented
AO Amplitude Offset Function Entry Implemented
AP Amplitude (carrier) Function Entry Implemented
DB dB Units Entry Implemented
DF dBf Units Entry Implemented
DM dBm Units Entry Implemented
DN Step Down Function Feature
Implemented
2
EM EMF Units Entry Implemented
FM Frequency Modulation Function Entry Implemented
FR Frequency (carrier) Function Entry Implemented
GT Flexible Sequence Feature Implemented
HI HI ALC Function Feature Not Implemented
HZ Hz Units Entry Implemented
IS Increment Set Function Qualifier
Implemented
2,
3
KZ kHz Units Entry Implemented
LO LO ALC Function Feature Not Implemented
MV mV Units Entry Implemented
MZ MHz Units Entry Implemented
P0 Digital Modulation Off Function Entry Implemented
P4 Digital Modulation On Function Entry Implemented
PC
Percent
4
Units Entry Implemented
PD Phase Decrement Function Feature Implemented
PF Pulse Modulation (Fast Mode) Function Entry Implemented
PI Phase Increment Function Feature Implemented