Specifications
I-4 Index
Index
frequency modulation SCPI commands,
internal (Continued)
waveform
, 2-25
source
, 2-23
state
, 2-24
frequency SCPI commands
, 2-27
continuous wave (CW)
, 2-27
fixed
, 2-27
mode
, 2-27
multiplier
, 2-28
offset
, 2-28
optimization
, 2-28
phase adjustment
, 2-29
phase reference, setting
, 2-30
reference
, 2-29
reference oscillator source query
, 2-29
reference oscillator source state
, 2-30
reference state
, 2-29
start
, 2-30
stop
, 2-30
FREQuency subsystem
, 2-27
full I/Q calibration SCPI command
, 2-12
function generator SCPI commands
pulse period configuration
, 2-31
pulse width configuration
, 2-31
sweep time
, 2-31
G
group, status byte, 1-44
H
HP 8656/57-compatible commands, 4-21
HP Basic
, 1-9
HP-IB
address, 2-76, 2-77
command statements
abort
, 1-18
clear
, 1-21
enter
, 1-23
introduction, 1-18
local
, 1-20
local lockout
, 1-20
output, 1-22
remote
, 1-19
querying address
, 2-83
select code
, 2-76
verification
, 1-6
I
I/O libraries, 1-2, 1-3
I/O, maximum
, 1-2
I/Q calibration SCPI commands
full, 2-12
I/Q
, 2-13
start frequency
, 2-13
stop frequency
, 2-13
IEEE 488.2 common commands
*CLS clear status
, 2-3
*ESE standard event status enable
, 2-3
*ESR? standard event status query
, 2-3
*IDN? identification
, 2-3
*OPC operation complete
, 2-3
*OPC? operation complete query
, 2-4
*RCL recall
, 2-4
*RST reset
, 2-4
*SAV save
, 2-4
*SRE service request enable
, 2-4
*SRE? service request enable query
, 2-4
*STB? read status byte query
, 2-4
*TRG trigger
, 2-5
*TST? self-test query
, 2-5
*WAI wait-to-continue
, 2-5
introduction
, 2-3
implied commands
, 1-32
instrument errors, reading
, 1-34
integer response data
, 1-41
interface cards
, 1-2
internal amplitude modulation SCPI commands
alternate frequency
, 2-9
alternate frequency amplitude
, 2-9
source rate
, 2-9
sweep time
, 2-9
sweep trigger
, 2-10
waveform
, 2-10
internal FM source deviation example, setting
, 2-89
internal FM source rate example, setting
, 2-89
interrupt, example of enabling
, 2-103
IQ calibration SCPI commands
default, 2-12
K
key versus command table, 4-2
keys, disabling
, 2-79
L
languages, 1-2
LFOutput subsystem
function generator sweep trigger
, 2-31
list example, set type
, 2-91
list SCPI commands
direction, 2-35