User`s guide

56 Chapter 2
Basic Operation
Using Data Storage Functions
Storing Files to the Memory Catalog
To store a file to the memory catalog, first create a file. For this example, use the default list sweep
table.
1. Press
Preset.
2. Press
Sweep/List > Configure List Sweep > More (1 of 2) > Load/Store.
This opens the “Catalog of List Files”.
3. Press
Store to File.
This displays a menu of alphabetical softkeys for naming the file. Store to: is displayed in the
active function area.
4. Enter the file name LIST1 using the alphabetical softkeys and the numeric keypad (for the
numbers 0 to 9).
5. Press
Enter.
The file should be displayed in the “Catalog of List Files”, showing the file name, file type, file
size, and the date and time the file was modified.
Table 2-1 Memory Catalog File Types and Associated Data
Binary binary data
State instrument state data (controlling instrument operating parameters,
such as frequency, amplitude, and mode)
LIST sweep data from the List Mode Values table including frequency,
amplitude, and dwell time
User Flatness user flatness calibration correction pair data (user- defined
frequency and corresponding amplitude correction values)
FIR Finite Impulse Response (FIR) filter coefficients
ARB Catalog Types (E8267D PSG with Option 601/602 only) user created files -
Waveform Catalog Types: WFM1 (waveform file),
NVARB Catalog Types:
NVWFM (non- volatile, ARB waveform file),
NVMKR (non- volatile, ARB waveform marker file),
Seq (ARB sequence file),
MTONE (ARB multitone file),
DMOD (ARB digital modulation file), MDMOD (ARB multicarrier
digital modulation file)
Modulation Catalog Types (E8267D PSG with Option 601/602 only) associated data for I/Q and
FSK (frequency shift keying) modulation files
Shape burst shape of a pulse
Bit Bit