User manual

Entering Patient Information
2-6 Revision 0.1
2Entering Patient Information
Your cardiograph allows entry of numeric patient ID, patient age, and sex.
To display the ID Entry screen, press
The patient ID entry can be configured as Auto or Manual. If your cardiograph is
configured as Auto, the cardiograph will automatically produce a unique patient ID
like 2000040600000001 (YYYYMMDDXXXXXXXX), which appears in the
Patient ID field. This patient ID will also appear on the ECG storage screen.
If you have entered a patient ID since the cardiograph was turned on, pressing
displays the information of the last patient on the ID Entry screen. (If the
cardiograph is configured as auto-generation of patient ID, the patient ID will be
different. The patient age and sex will remain the same.)
If you want to take more ECGs from the same patient, press to proceed.
Otherwise, edit the patient information as necessary. To erase data you have entered,
use the key to delete the character to the left of the cursor.
You can stop entering patient ID information at any time by pressing .
If your cardiograph is configured as Manual entry of patient ID, perform the
following steps:
1. Type the patient ID in the Patient ID field by pressing the relevant softkeys.
2. Press to change the numbers that F1 to F5 stand for, 1 to 5 or 6 to 0.
1 2 3 4 5
Age Sex
Patient ID
F1 F2 F3 F4 F5
ID Entry