User manual

Managing Stored ECGs

5-4

3. Press (F3) to display the Manage Stored ECGs menu.

4. Select the desired ECG from the list by pressing or to move the cursor

down, or by pressing or to move the cursor up until the ECG is

highlighted.

You can move to the previous page by pressing or until ECGs from the

previous page appear at the top of the screen. You can move to the next page by

pressing or until ECGs from the next page appear at the bottom of the

screen.

5. Press (F3) to select the ECG. An asterisk appears to the left of selected

ECGs. The softkey changes to when a selected ECG is high-

lighted.

Printing Stored ECGs

Print previously selected ECGs or the highlighted ECG by pressing (F1).

The ECGs will print with the speed and format most recently selected for printed

reports. These settings are shown on the idle screen. If you want to print an ECG

using a different format or speed than used on the original printed report, you can

use the configuration menu or the front panel keys to change the report settings

before printing.

Select

Print Select Select Delete Exit

Manage Stored ECGs ECGs stored: 15

1/3

Patient ID Date and Time

23456 01-Mar-2000 16:50

56321 01-Mar-2000 15:29

45687 26-Feb-2000 08:52

78652 25-Feb-2000 10:31

√

=Transmitted #=Printed *=Selected

F1 F2 F3 F4 F5

All

78654 25-Feb-2000 10:36

78668 25-Feb-2000 10:42

NOTE

Select

Unselect