User manual

A-1

Appendix A Setting Up

Your Cardiograph

A Setting Up Your Cardiograph

This chapter describes how to

• Install the battery

• Connect the power adapter and patient cable

• Connect the cardiograph to a printer

• Connect the modem and transmission cables

You may want to configure the cardiograph to suit your specific application. See

Chapter 4, “Configuring Your Cardiograph” for more information.

It is highly recommended that you set the date and time of your cardiograph. The

date and time will be used for ECG storage and printed out on ECG reports.

Your cardiograph uses soft power-off. After you turn off the cardiograph, please

wait 10 seconds or more before you turn it on again. Otherwise, the cardiograph

may not work properly.

NOTE