User`s guide

Setting the Cardiograph Location and ID Codes (Options #A05 or StressWriter only)
A-10 Setting Up Your Cardiograph
7. Press ( ) to save your selection.
Setting the Cardiograph Location and ID Codes
(Options #A05 or StressWriter only)
The cardiograph location and ID codes should be set before transmitting or
receiving ECGs. These codes are assigned by your a TraceMaster ECG Man-
agement System systems administrator.
1. Press the key. The Main Menu appears.
2. Press the key until the Configure the Cardiograph selection
is highlighted.
3. Press the ( ) key, or the key. The Setup Miscella-
neous menu appears.
4. Press the key to highlight the cardiograph location code.
5. Enter the five digit numeric code.
6. Press the key to highlight the cardiograph ID code.
7. Enter the four digit numeric code.
8. Press ( ) to save your selection.
Exit
)
Select
)
Exit
)