User`s guide

Setting Up Predictive Instruments
PageWriter 200/300pi M1771A/1770A Cardiograph A-19
A
Setting Up Predictive Instruments
Your PageWriter 300pi contains Predictive Instrument software applications
which generate 0-100% predicted probabilityscores of Acute Cardiac
Ischemia (ACI) and patient outcome, with and without thrombolytic therapy,
for Acute Myocardial Infarction (AMI). Additional information on the Predic-
tive Instrument applications can be found in “Understanding the ECG Analy-
sis Program”.
This manual briefly describes the steps to configure the cardiograph for Pre-
dictive Instruments. Please refer to the Predictive Instruments Physician’s
Guide for further details of the Acute Cardiac Ischemia - Time Insensitive
Predictive Instruments (ACI- TIPI) and the Thrombolytic Predictive Instru-
ment (TPI) applications.
1. Select ‘Setup Predictive Instruments’ from the configuration menu. Here
you can enable ACI- TIPI and the ACI-TIPI risk management report, as
well as define the ACI-TIPI probability limits to generate the Risk Man-
agement Report.
2. This menu also allows you to enable the Thrombolytic Predictive Instru-
ment, enable the Acute Myocardial Infarction screening, and specify the
Interpretation Criteria.
3. Press the ( ) to select the settings that you want enabled. Use
the (arrow keys) to move to the next question.
4. If a Risk Management Report is desired, type in the upper and lower lim-
its of the ACI-TIPI scores for which a Risk Management Report is
desired. If the ACI-TIPI score falls between these limits, the Risk Man-
agement Report will be printed.
Table A-2: Risk Management Report Parameters
Parameter
Choices
a
Comments
Enable ACI-TIPI Analysis? Yes/No
Enable Risk Management
Report?
Yes/No Only available with
ACI TIPI enabled
Low Limit for Risk Mgmnt
Report (0-100)?
20%
Change
)