User`s guide

Set-up Transmission (Options #A05 or StressWriter only)

B-18 Configuring Your Cardiograph

Fax Grid

The fax grid controls the density of the ECG transmitted using the fax.

l Full: transmits both the five and one millimeter gridlines for the

waveform portion of the ECG.

l Partial: transmits only the five millimeter gridlines for the wave-

form portion of the ECG.

Connection Speed

The connection speed determines the rate at which information is received by

the cardiograph when a remote device initiates transmission. This speed must

be set to match the transmission speed of the remote device.

Table B-6: Set-up Transmission Fields (Options #A05 or StressWriter only)

Parameter

Choices

Comments

Modem Initializa-

tion string

AT &F M0 E0 &C1 &D2 S0=0 &S0 &M0

&W AT

For the M1706B

modem. Check your

modem documentation

for the correct initializa-

tion string if you are

using a different

modem.

The modem initializa-

tion string may be up to

39 characters.

Fax Initialization

string

AT &F M0 E0 &C1 &D2 &S0 +FCLASS=1 May be up to 39 charac-

ters.

Fax grid Full

Partial