User guide

Section V

Replaceable Parts

5-1 This section contains information for ordering replacement parts found in table 5-1.

Table 5-1

Ref

Designator

Description Qty

Note Part Number

85662A LCD Retrofit Kit 85662A-LCD-RK

A1A21 Plotter board 1 1 85662A-Plotter

A1A22 SRAM board 1 1 85662A-SRAM

A1A23 Color LCD Display 1 1 85662A-Display

A3A4 A3A4 Color Video Processor board 1 2 85662A-A3A4

SS Screw, pan-Philips-SEM, 4-40 x 3/4 4 1 85662A-M1

SS Screw, 82° flat-pozi, 6-32 x 7/16

4 1 85662A-M2

SS Screw, 82° flat-pozi, 6-32 x 7/16

4 3 85662A-M2

Bracket, Left 1 1 85662A-M3

Bracket, Right 1 1 85662A-M4

Manual and Software Utility on CD 1 2 85662A-M5-1.10

Modified Inner Bezel Casting 1 1 85662A-M6

A1A4R43 Resistor, axial, 1/4W, 8.25K 1% 1 3 85662A-R1

A1A5R43 Resistor, axial, 1/4W, 6.49K 1% 1 3 85662A-R2

Cable, ribbon, LCD to SRAM 1 1 85662A-W1

Cable, RJ-45, 12”, Plotter to A3A4 1 2 85662A-W2

Cable, 23V Power (red/black/yellow wire harness) 1 2 85662A-W3

Cable, Coaxial, 6.8”, Y-axis 1 2 85662A-W4

Cable, Coaxial, 6.3”, X-axis 1 2 85662A-W5

Cable, 14-pin DIP x 6” 1 2 85662A-W6

Wire, 28 AWG, insulated, pre-tinned 2” 2 3 85662A-W7 & W8

NOTE: 1. Shipped assembled

2. Shipped in bubble wrap bag.

3. Shipped in plastic 4-dram box

5-2 Before ordering parts, verify the serial number of your kit. This can be accessed

by entering CF STEP SIZE, 8,0,8,3. The serial number can also be found on the

A1A21, Plotter board that is mounted on the rear of the LCD. Have this information

available when ordering. Press AUTO above CF STEP SIZE when finished viewing the

serial number from the front panel.