User`s guide

4 Toggle the softkeys to select the correct configuration for your
printer, plotter, or computer.
Print Factors
Oscilloscope factors may be turned on or off for hard copy prints and plots. All
factors are printed on the hard copy when on is selected. When factors is
selected for a hard copy plot, the plot is in portrait mode, with the factors
plotted at the bottom. When factors is not selected for hard copy plot, the plot
is plotted in landscape mode automatically to maximize the plot area. Figure 2
shows an example of a print with factors on. Figure 3 shows an example of a
plot with factors off.
Print with Factor ON
Figure 2
Operating the Test Automation Module
To configure the interface
19