User`s guide

Print Resolution
High or low hard copy resolution can be selected for hard copy prints and plots.
When high resolution is selected, the full-bright and half-bright traces on the
oscilloscope screen are printed or plotted on the hard copy.
High resolution printing requires an HP-PCL compatible printer capable of
printing at 300 dpi (dots-per-inch), such as an HP LaserJet Series printer. The
half-bright trace is printed in gray shading while the full-bright trace is printed
in black. Figure 4 shows an example of a high resolution print using the HP
LaserJet II printer.
High resolution plot uses two pens for the hard copy. Half-bright traces are
plotted with plotter pen 1 and full-bright traces are plotted with plotter pen 2.
Print in High Resolution mode using an HP LaserJet Series II printer
Figure 4
Operating the Test Automation Module
To configure the interface
21