Technical data

iu the PROTECT
position.
Troubleshooting 5-3
module. Verify that it is
wrihprotect switch on the left side of
the
and/or
IF sections.
Refer to 2001 ILLEGAL CMD.
Refer to 2001 ILLEGAL CMD.
Refer to 2001 ILLEGAL CMD.
Check the
maim&me master,
can be isolated by substituting
and module.
The problem
commaud, a problem internal to the module, or
an open cable between the master
sending such a
can be
caused by the master element
encounters
a command it does not recognize. This
when the module occurs
EAROM
UNPROTECTED
ROM CHECK
The programmed checksum of the ROM does not
ERROR agree with the computed checksum.
This error
Tabfe 5-2. HP 70903A Error Messages
Error Number
Message
Meaning
2001
ILLEGAL
CMD
2002
2006
2009
ILLEGAL
PARAMETER
PARAMETER
OUT OF RANGE
PRQTCOL
ERROR
nsuaBy catastrophic to operation of the module.
70903A hardware. An error indicates that some
of the hardware is not functioning properly. Measurement accuracy may be impaired.
Hardware Broken Errors
These error codes are generated by hardware or firmware failures within the module and are
to 2999
6000 to 6999
7000 to 7999
instrument is used incorrectly. This usually
Hardware Warning Errors
These error codes report the status of the HP
Warning
Hardware Broken
Usage/Operating Errors
Usage and operating errors are generated when an
occurs during remote operations.
2000 Usage/Operatiug
Hardware
an HP 70903A are listed in this section. The
messages are grouped by functional category; each category has its own series of numbers.
Refer to the installation and verification manual
for the system master for a complete list of
all system error-messages.
Table 5-l. Error Message Grouping
Error Messages
Spectrum-analyzer error-messages generated by