User`s guide

148 Chapter 5
Safety and Regulatory Information
Safety Symbols
Safety and Regulatory Information
Safety Symbols
The following safety notes are used throughout this manual. Familiarize yourself with
each of the notes and it’s meaning before operating this instrument.
WARNING Warning denotes a hazard. It calls attention to a procedure which, if
not correctly performed or adhered to, could result in injury or loss
of life. Do not proceed beyond a warning note until the indicated
conditions are fully understood and met.
CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not
correctly performed or adhered to, could result in damage to or destruction of
the instrument. Do not proceed beyond a caution sign until the indicated
conditions are fully understood and met.
The instruction document symbol. The product is marked with this symbol
when it is necessary for the user to refer to the instructions in the manual.
The CE mark is a registered trademark of the European Community. (If
accompanied by a year, it is when the design was proven.)
The CSA mark is a registered trademark of the Canadian Standards
Association.
This is a symbol of an Industrial Scientific and Medical Group 1 Class A
product.
This C-Tick mark is a registered trademark of the Australian Spectrum
Management Agency.
This symbol indicates that the input power required is AC.
This symbol is used to mark the ON position of the power line switch.
This symbol is used to mark the OFF position of the power line switch.
N279