Specifications

Phase Noise Using a Phase Lock Loop
Define Msrmnt
Source Control i
SOURCE CONTROL FOR MEftSLIREfSBr USING R PHRSE LOCK LOOP
DOT
USER'S SPCE | J"
_DN COW. _
1172°r
SYSTEM '.NTPL
_TiME BRSE_
HOI IN N'lE
Ret. Time
Source 8a&i?
Softkey and Block Description
When configuring the Source Control Diagram, it is important that the
correct connections are made and that the appropriate device is shown
in each block being used. For the Phase Noise Using a Phase Lock Loop
measurement type, the following blocks will appear in the display.
REF. SOURCE: Any of the HP 11848A Internal Sources or any RF Sources
defined in the System Configuration Table can be placed under System
Control. Reference Sources other than HP 11848A Internal Sources must
be defined in the System Configuration Table as RF Source, RF Sourcel,
or RF Source2. If the Reference Source is the VCO for the measurement,
it can be tuned by either the Tune Voltage or via the Time Base.
2-102 Source Control: $N w/PLL