Specifications

Description
A Result File should be stored any time a permanent record of the results is
required, such as for verification of performance testing during calibration,
or when a "3 Oscillator Comparison" is performed.
The HP 3048A is shipped with a "Default" Result File on the System
Data Disc. This Result File contains phase noise measurement data for
the HP 11848A Internal 10 MHz sources (10 MHz A vs. 10 MHz B).
This default measurement data is provided to allow you to quickly verify
system operation by comparing your measurement of A vs. B to the results
obtained at the factory prior to shipment.
NOTE
Any file stored as the Default Result File will be automat
ically loaded. The system automatically loads the Default
Result File when the software is loaded, or if the
softkey is pressed.
System Preset
Softkey Descriptions
Sort Files: Lists the files in alphanumeric order instead of chronological
order.
Load File: Recalls and loads the Result File specified by the cursor's
position in the list.
Next Page: Accesses the following pages of the Result File Directory. This
softkey only appears if there are more than 10 file entries listed.
3-14 Result Files
rev.05SEP89