Specifications

Description
Normal Test
The Normal Test Mode is the default operating condition for the
HP 3048A. The Normal Test Mode configures the system to perform each
measurement in the minimum time and with the minimum amount of
operator assistance.
Trouble Shoot Mode
The Trouble Shoot Test Mode is helpful for trouble shooting the mea-
surement. When the HP 3048A has been configured in the Trouble Shoot
Mode, the 11848 Control softkey appears at various times throughout
the measurement process, including in the Connect Diagram display. This
softkey provides access to control of the HP 11848A's internal hardware.
NOTE
Changing the HP 11848A's internal hardware is considered
an Advanced Function and should only be done by persons
with a complete understanding of the HP 11848A's circuit
block diagram and the measurement process. For further
information on the HP 11848A control feature, refer to
11848A Control in this chapter.
5-4 Test Mode