Specifications

Table 1. Softkey Descriptions (11 of 17)
Key Name
Other Keys
Param
Summary
Pert. Tests
Place DUTs
Plot Data
SHIFT Plot
Data
Plot
ON/OFF
Plotter
Pens
Plot w/o
Spurs
Description
Accesses the second set of graphics function keys.
Accesses the list of measurement setup and
calibration data for the current noise graph displayed.
Lists the measurement-defining parameters for the
measurement results currently in memory or loaded
from a Result File.
Accesses the HP 3048A System Checks that verify
the performance of the HP 3048A.
Configures the DUT in the Source Control Diagram
for the Phase Noise Without a Phase Lock Loop
measurement type.
Plots the noise data on the display without redrawing
the graticule. Useful for placing multiple noise traces
(loaded from the Result files) on a single graph.
Plots the noise data currently in memory to an
external plotter.
Causes the system to display the Measurement
Response of the HP 11848A circuit path as it is
characterized during system calibration.
Accesses the plotter-pen specification menu from
System Config Table. This menu allows you to select
one of 8 colors for each of four pens.
Plots the measured noise data currently in memory
without plotting the marked spurs. To display the data
without spurs, you must first select the
softkey then the
Plot w/o Spurs
softkey.
Redraw Graph
Chapter
3 Graphics
Functions
3 Graphics
Functions
HP 3048A
Calibration
Manual
2 Meas.
Definitions
3 Graphics
Functions
HP 3048A
Calibration
Manual
6 System
Configuration
3 Graphics
Functions
14 Softkey Index