Specifications

Table 1. Softkey Descriptions (14 of 17)
Key Name
Select Test
Send
Command
Set Clock
Set Line
Sigma vs.
Tau
Slope Lines
Sngl Path
Solve A,B.C
Solve for B
Source
Source
Control
Span
Description
Allows selection of individual tests from the
Functional Test display.
Outputs the conditions displayed on the 11848
Control display to the HP 11848A interface.
Sets the computer's real time clock.
Sets the slope line currently active on the graph.
Allows computation of Sigma for the specified N, T,
Tau, and Stop frequency.
Allows you to place slope lines on the Results Graph.
Selects the signal path for the Functional Check.
Initiates the Three Oscillator Comparison computation.
Initiates the Two Oscillator Comparison computation.
Configures the source in the Source Control Diagram
for Phase Noise Without a Phase Lock Loop
measurement.
Accesses the Source Control Diagram for defining the
measurement set up and HP-IB control requirements.
Increments the spans defined in the FFT and RF
Segment Tables for the Noise Monitor Mode.
Chapter
HP 3048A
Calibration
Manual
5 Special
Functions
6 System
Configuration
3 Graphics
Functions
4 Computed
Outputs
3 Graphics
Functions
HP 3048A
Calibration
Manual
4 Computed
Outputs
4 Computed
Outputs
2 Meas.
Definitions
2 Meas.
Definitions
5 Special
Functions
Softkey Index 17