Technical data

7000 Series Oscilloscopes Service Guide 3
In This Service Guide
This book provides the service information for the Agilent 7000
Series Oscilloscopes. This manual is divided into these
chapters:
1 Characteristics and Specifications
This chapter contains a partial list of characteristics and
specifications for the Agilent InfiniiVision 7000 Series
Oscilloscopes.
2Testing Performance
This chapter explains how to verify correct oscilloscope
operation and perform tests to ensure that the oscilloscope
meets the performance specifications.
3 Calibrating and Adjusting
This chapter explains how to adjust the oscilloscope for
optimum operating performance.
4Troubleshooting
This chapter begins with suggestions for solving general
problems that you may encounter with the oscilloscope.
Procedures for troubleshooting the oscilloscope follow the
problem solving suggestions.
5Replacing Assemblies
This chapter describes how to remove assemblies from the
7000A Series oscilloscope.
6Replaceable Parts
This chapter describes how to order replaceable assemblies and
parts for the Agilent 7000 Series Oscilloscopes. It includes
diagrams and parts lists for hardware that you can order.
At the front of the book you will find safety notice descriptions
and document warranties.
7000 service guide.book Page 3 Thursday, October 16, 2008 12:18 PM