Technical data

Demo Board Getting Started Guide
Agilent InfiniiVision 7000B Series Oscilloscopes Evaluation Guide 11
3 Horizontal Control:
a Turn the large
knob in the
Horizontal control
section clockwise
and
counter-clockwise
to control the
time/div setting of
the horizontal axis.
Observe the changes in the displayed signal. The current time base
setting is displayed at the top of the display on the status line.
b Turn the small knob in the horizontal control section to move the
waveform horizontally from the trigger point.
c Press the [Horiz] key to display the Horizontal menu. Note the
various modes of Normal, Roll, XY and the zoom mode softkey.
d Press the zoom key to quickly turn on the zoom mode. This
split-screen mode shows the big picture on top and an expanded view
on the bottom. Turn the large time base knob counter clockwise to
make the window on top larger.
For instant help on any topic, press and hold any key or softkey.