Technical data

Notices
© Agilent Technologies, Inc.
2008-2009
No part of this manual may be
reproduced in any form or by any
means (including electronic stor-
age and retrieval or translation
into a foreign language) without
prior agreement and written con-
sent from Agilent Technologies,
Inc. as governed by United States
and international copyright laws.
Manual Part Number
N2918-97004
Edition
First edition, November 2009
Printed in U.S.A.
Agilent Technologies, Inc.
1900 Garden of the Gods Rd.
Colorado Springs, CO 80907 USA
Warranty
The material contained in this
document is provided “as is,”
and is subject to being changed,
without notice, in future editions.
Further, to the maximum extent
permitted by applicable law, Agi-
lent disclaims all warranties,
either express or implied, with
regard to this manual and any
information contained herein,
including but not limited to the
implied warranties of merchant-
ability and fitness for a particular
purpose. Agilent shall not be lia-
ble for errors or for incidental or
consequential damages in con-
nection with the furnishing, use,
or performance of this document
or of any information contained
herein. Should Agilent and the
user have a separate written
agreement with warranty terms
covering the material in this doc-
ument that conflict with these
terms, the warranty terms in the
separate agreement shall con-
trol.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and may
be used or copied only in accor-
dance with the terms of such
license.
Restricted Rights
Legend
If software is for use in the perfor-
mance of a U.S. Government
prime contract or subcontract,
Software is delivered and licensed
as “Commercial computer soft-
ware” as defined in DFAR
252.227-7014 (June 1995), or as a
“commercial item” as defined in
FAR 2.101(a) or as “Restricted
computer software” as defined in
FAR 52.227-19 (June 1987) or any
equivalent agency regulation or
contract clause. Use, duplication
or disclosure of Software is sub-
ject to Agilent Technologies’ stan-
dard commercial license terms,
and non-DOD Departments and
Agencies of the U.S. Government
will receive no greater than
Restricted Rights as defined in
FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will
receive no greater than Limited
Rights as defined in FAR 52.227-14
(June 1987) or DFAR 252.227-7015
(b)(2) (November 1995), as appli-
cable in any technical data.
Safety Notices
CAUTION
CAUTION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, prac-
tice, or the like that, if not cor-
rectly performed or adhered
to, could result in damage to
the product or loss of impor-
tant data. Do not proceed
beyond a CAUTION notice
until the indicated conditions
are fully understood and met.
WARNING
A WARNING notice denotes
a hazard. It calls attention to
an operating procedure,
practice, or the like that, if
not correctly performed or
adhered to, could result in
personal injury or death. Do
not proceed beyond a
WARNING notice until the
indicated conditions are fully
understood and met.
2