Technical data

2 Using Auto Scale, Cursors, Measurements, and Waveform Math
22 Agilent InfiniiVision 7000B Series Oscilloscopes Evaluation Guide
28 Press [Math].
29 Press Operator; then, select FFT.
30 Press [Analyze] (in the Tools section); then,
select Precision.
31 Press Feature – Precision two times to engage
higher precision waveform math.
32 Press [Run/Stop] to stop acquisitions.
33 Press [Cursors].
34 Press X1 Source; then, select Math: f(t).
35 Press X2 Source; then, select Math: f(t).
36 Push the Cursors knob; then, turn it to select the
X1 cursor from the popup menu.
37 When the popup menu closes, turn the Cursors
knob to set the “X1” cursor on the highest peak of
the FFT waveform.