Technical data

11 Verifying I
2
S Serial Bus Communication
60 Agilent InfiniiVision 7000B Series Oscilloscopes Evaluation Guide
(default setting). To analyze left and right channel data both before and
after this particular byte, let’s turn on the “Lister” display mode.
15 Press [Serial], and then press Lister.
16 Next, press Lister Display to turn it on.
17 To scroll through a stored list of I
2
S packets, first press [Run/Stop] to
stop acquisitions.
18 Rotate the selection knob to scroll through the list with direct
time-correlation to the captured waveforms.
For additional information on how to automatically search and navigate
within the lister display, refer to “Using Serial Search and Navigation" on
page 67.