User`s guide

Reference 15
InfiniiVision Oscilloscopes User’s Guide 401
•LSS — Low Speed Serial Decode. This license provides serial decode of I
2
C and SPI
buses.
•mem8M — Memory Upgrade. This license is always provided with 7000 Series
oscilloscopes. It shows the total memory depth (8 Mpts interleaved).
•MSO — Mixed Signal Oscilloscope. This license adds 16 digital channels. You do not
have to install any hardware. A digital probe cable is provided for connection to your
device under test.
•PWR— This license lets your oscilloscope communicate with software running on a
PC for characterizing power devices.
•SEC — Secure Environment mode. This license prevents oscilloscope setup and trace
information from being stored in the oscilloscope’s internal memory.
•SGM — Segmented memory. This license lets you capture infrequent or burst signals
with great resolution by eliminating the capture of your signal’s “dead time.”
•SND — I
2
S serial decode option (for 4 channel or 4+16 channel models only).
Upgrading to an MSO
A license can be installed to activate the digital channels of an oscilloscope that was not
originally ordered as a mixed-signal oscilloscope (MSO). A mixed signal oscilloscope has
analog channels plus 16 time-correlated digital timing channels.
To view the currently installed licenses press [Utility]& Options&Licenses&Show
license information.
For information about upgrading your oscilloscope through licensing, contact your local
Agilent Technologies representative or see www.agilent.com/find/7000.