Keysigth Technologies N4903B J-BERT

dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
22
22 | Keysight | J-BERT N4903B High-Performance Serial BERT, 7 Gb/s and 12.5 Gb/s - Data Sheet
Mainframe haracteristics
igure 30. Rear panel view
Operating temperature 5 ºC to 40 ºC (-23 to +104 ºF)
Storage temperature -40 ºC to +70 ºC (-65 to +158 ºF)
Operating humidity 95% relative humidity,
non-condensing
Storage humidity 50% relative humidity
Power requirements 100 to 240 V, ± 10%, 47 to 63 Hz, 450 VA
Physical dimensions Width: 424.5 mm (16.75 in)
Height: 221.5 mm (8.7 in) without feet
Depth: 580.0 mm (22.9 in)
Weight (net) 26.3 kg (58.0 lb)
Weight (shipping, max) 36.3 kg (80.0 lb)
Recommended
recalibration period
1 year
Warranty period 3 year return to Keysight (1 year return to
Keysight before March 2013) See ordering
instructions for extended warranty
Display
8 color D touch screen
Data entry
– olor touch screen display numeric eypad with up/down
arrows dial-nob control or external ey board and mouse
via SB interface
– Pattern export/import
ard dis
or local storage of user patterns and data. An external dis is
also available for using over the SB interface.
Table 29. General mainframe characteristics
Remote control interfaces
onnectivity GPIB IEEE 488 AN SB 2.0.
anguage SPI II.M. SPI commands can be exported via
copy/paste from the utility menu/output window.
Built-in web server provides remote GI access and control
of J-BERT via a standard Java enabled web browser on your
computer.
I libraries
eysights I libraries suite ships with the N4903B to help uicly
establish an error-free connection between your P and
instruments regardless of the vendor.
ther interfaces
Parallel printer port 2 x AN GA output 4 x SB 2.0 1 x SB
1.1 (front).
perating system
Microsoft indows XP for Embedded Systems
or S/N below M49101000 Microsoft indows XP Professional
Regulatory standards
SafetyIE 61010-12001 EN 61010-12001 AN/SA-22.2
No.61010-1-04
 61010-12004
EM EN 613261997  A11998  A22001
IE 613261997  A11998  A22000
uality management IS 9004 IS 14001
Specication assumptions
The specications in this document describe the instruments
warranted performance.
Non-warranted values are described as typical.
All specications are valid in a range from 5  to 40  ambient
temperature after a warm-up phase of 30 minutes.
If not otherwise stated all unused inputs and outputs need to be
terminated with 50  to ground.
All specications if not otherwise stated are valid using the
recommended cable set N4910A 2.4 mm 24 matched pair.