Technical data
Table Of Contents
- EMC Measurement Application Measurement Guide
- Table of Contents
- 1 EMC Measurements
- 2 Conducted Emissions Measurements
- 3 Radiated Emissions Measurements
- A: Line Impedance Stabilization Networks (LISN)
- B: Antenna Factors
- C: Basic Electrical Relationships
- D: Detectors Used in EMI Measurements
- Glossary of Acronyms and Definitions
22
Radiated Emissions Measurements
Making Radiated Emission Measurements
Adding signals to the list
Step Action Notes
1 Set the search criteria
to peak criteria and
limits
a. Press Meas Setup, More 1 of 2,
Limits, Search Criteria, Peak
Criteria and Limits
2 Switch to search a. Press Meas Setup, Scan
Sequence, Search Only
3 Add signals to the
Signal List
a. Press Sweep/Control, Start This places the ambient signals in
the Signal List.