Technical data
Table Of Contents
- EMC Measurement Application Measurement Guide
 - Table of Contents
 - 1 EMC Measurements
 - 2 Conducted Emissions Measurements
 - 3 Radiated Emissions Measurements
 - A: Line Impedance Stabilization Networks (LISN)
 - B: Antenna Factors
 - C: Basic Electrical Relationships
 - D: Detectors Used in EMI Measurements
 - Glossary of Acronyms and Definitions
 

 43
Immunity 
1. The property of a receiver or any other equipment or system enabling it to reject a 
radio disturbance.
2. The ability of electronic equipment to withstand radiated electromagnetic fields 
without producing undesirable responses.
Intermodulation 
Mixing of two or more signals in a nonlinear element, producing signals at frequencies 
equal to the sums and differences of integral multiples of the original signals.
Isotropic 
Isotropic means having properties of equal values in all directions.
Mono pol 
An antenna consisting of a straight conductor, usually not more than one-quarter wave 
length long, mounted immediately above, and normal to, a ground plane. It is 
connected to a transmission line at its base and behaves, with its image, like a dipole.
Narrowband emissions 
That which has its principal spectral energy lying within the bandpass of the 
measuring receiver in use.
Open area 
A site for radiated electromagnetic interference measurements which is open flat 
terrain at a distance far enough away from buildings, electric lines, fences, trees, 
underground cables, and pipe lines so that effects due to such are negligible. This site 
should have a sufficiently low level of ambient interference to permit testing to the 
required limits.
Polarization 
A term used to describe the orientation of the field vector of a radiated field.
Radiated interference 
Radio interference resulting from radiated noise of unwanted signals. Compare radio 
frequency interference below.
Radiation 
The emission of energy in the form of electromagnetic waves.
Radio frequency interference 










