Troubleshooting guide

33
Front and Rear Panel Features
Display Annotations
Display Annotations
This section describes the display annotation as it is on the EMI Receiver display.
Other measurement application modes have some annotation differences.
Item Description Function Keys
1 Measurement bar - Shows general measurement
settings and information.
Indicates single/continuous
measurement.
Some measurements include limits that the data is
tested against. A Pass/Fail indication may be
shown in the lower left of the measurement bar.
All the keys in the Setup part of
the front panel.
2 Active Function (measurement bar) - when the
current active function has a settable numeric
value, it is shown here.
Currently selected front panel
key.
3 Banner - shows the name of the selected
application that is currently running.
Mode
4 Measurement title - shows title information for
the current measurement, or a title that you
created for the measurement.
Meas
View/Display, Display, Title