Troubleshooting guide

46
Instrument Operating System
Licensing New Measurement Application Software - After Initial Purchase
3. Load the license file • Connect the USB storage device to
one of the EMI Receiver USB
ports.
Windows will detect the new
hardware and may display the
configuration menu.
The instrument will automatically
load the license file. (This may take a
few minutes) Upon completion, the
Agilent License Manager will
display a “Successful License
Installation” message.
NOTE Alternatively the license file can be manually installed over USB or LAN by placing the
license file in the following folder on the EMI Receiver.
C:\Program Files\Agilent\licensing
4. Verify installation a. Cycle the power on the instrument.
b. Press System, Show, System.
c. Verify that the new application
appears in the list.
The application will not be available
for use until after the power has been
cycled.
This displays the list of installed
applications.
If you require further assistance,
please contact the Agilent support
team.
Online assistance:
http://www.agilent.com/find/assist
If you do not have access to the
Internet, contact your local Agilent
Technologies Sales and Service
Office, or if in the United States, call
1-800-829-4444.
Step Action Notes