Troubleshooting guide

Using Microsoft Windows XP

Embedded Web Server: Using the X-Series Instruments Remotely

Accessing the Web Control SA tab

Selecting this tab lets you view, control and interact with the instrument through the

web server.

Step Notes

1. Click Control A password entry dialog appears.

By default, this password is set at the factory

as “agilent”. However, you may subsequently

change the password. (Press System, I/O

Config, Reset Web Password on the

instrument front panel to change the

password.)

When the correct password is entered, the

instrument control web page appears.

NOTE To view the instrument display, the

instrument application must be

running.

2. Click Display Front Panel

Keys

This brings up a virtual keyboard that can be

used to control the instrument.