User's Manual Network Analyzer N2610A

Cable Testing with the FrameScope 350 3
Setting Up an Autotest
Agilent FrameScope 350 User’s Manual 71
4 Press the backspace arrow to erase the number in the display, then
press the number or letter keys to enter the new starting value. Press
OK. The keyboard closes, and the new starting value appears in the
Enter Start Value field.
5 To set the number of instances of a category (for example, the
number of floors), press the Enter End Value field. The onscreen
keyboard opens.
6 Press the backspace arrow to erase the value in the display, then
press the number or letter keys to enter the new value. Press OK. The
keyboard closes, and the new ending value appears in the Enter End
Value field.
7 Repeat steps 2 through 6 for all the selected categories.
8 Press OK. The Autotest Setup screen displays.
Choosing the Cable Type
Cable from different manufacturers has different transmission
characteristics. The FrameScope 350 compensates for those
differences if you tell it what cable is used on the job. A solid
black cable spool icon indicates a shielded cable, a grey cable
spool icon indicates an unshielded cable.