FrameScope Pro Network Performance Analyzer Model Agilent N2620A-90003 User's Manual

20 Agilent FrameScope Pro User’s Manual
1 Introducing the FrameScope Pro
Getting Started
Checking Power and Charging the Battery
The FrameScope’s battery should provide enough power for a
typical day of testing. The AC power adapter/charger can also
be used to power the unit and to recharge the battery.
To check the battery’s charge level, perform these steps:
1 Switch on the FrameScope, if necessary, by pressing the
Power button on the front of the unit.
2 Observe the battery icon in the Status display area on the
Main Menu.
The battery icon will show how much charge remains in the
battery (for example, 45%). If the battery is severely depleted,
a low-battery message will be displayed.
3 To recharge the battery or to power the FrameScope from an
AC power source, plug the DC power connector on the
adapter/charger into the 12 V DC connector on the side of
the battery
NOTE
To shorten the charging time, Agilent recommends switching off the
FrameScope while charging.
WARNING
Do not operate the FrameScope while the battery is hot
immediately after charging.
When the battery temperature exceeds 55ºC (131ºF), a warning
message, for example, “FrameScope too hot”, will appear to alert
the user.