Product specifications

29
Analog/resistance programming
For greater programming flexibility
and to minimize the time associated
with computer interaction, both the
output voltage and current can be
controlled by an external voltage
or resistance programming signal.
Connect multiple units in
parallel and series
Should you need greater output
power, the N5700 series power
supplies give you the flexibility
to connect in parallel up to four
similarly rated units for greater
output current and connect two
similarly rated units in series for
greater output voltage (see DC
float voltage information)
Fan speed control
Lab bench use is enhanced by the
fan speed control, which helps to
minimize the acoustic noise.
Application notes
Side-by-Side Comparison:
Agilent N5700 System DC Source
and Sorensen DLM Power Supply
5989-1628EN
Side-by-Side Comparison:
Agilent N5700 System DC Source
and Xantrex XFR DC Power Supply
5989-1630EN
Trends in Programmable Medium Power
(~1 kW) System DC Power Supplies
5989-1331EN
Single-Output 750 W & 1500 W GPIB, LAN, USB
(Continued)
Spe cif icati ons
(at 0° to 55°C unless
otherwise specified)
More detailed specifications at www.agilent.com/find/N5700
Basic DC Power Supplies essential features for a tight budget
N5747A N5748A N5749A N5750A N5751A N5752A
Number of outputs 1 1 1 1 1 1
GPIB, LAN, USB Yes Yes Yes Yes Yes Yes
Ouput ratings
Voltage 60 V 80 V 100 V 150 V 300 V 600 V
Current 12.5 A 9.5 A 7.5 A 5 A 2.5 A 1.3 A
Power 750 W 760 W 750 W 750 W 750 W 780 W
Programming accuracy
Voltage 0.05%+ 30 mV 40 mV 50 mV 75 mV 150 mV 300 mV
Current 0.1%+ 12.5 mA 9.5 mA 7.5 mA 5 mA 2.5 mA 1.3 mA
Output ripple and noise
CV p-p
(Up to 20 MHz) 60 mV 80 mV 80 mV 100 mV 150 mV 300 mV
CV rms
(From 5 Hz – 1 MHz) 8 mV 8 mV 8 mV 12 mV 20 mV 60 mV
Readback accuracy
Voltage 0.1%+ 60 mV 80 mV 100 mV 150 mV 300 mV 600 mV
Current
0.1%+ 37.5 mA 28.5 mA 22.5 mA 15 mA 7.5 mA 3.9 mA
Load regulation
(change from 10% to 90%)
Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV
Current 7.5 mA 6.9 mA 6.5 mA 6 mA 5.5 mA 5.26 mA
Line regulation
(change from 85-132 VAC input
or 170-265 VAC input)
Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV
Current 3.25 mA 2.95 mA 2.75 mA 2.5 mA 2.25 mA 2.13 mA
Transient response time
1
Time ≤ 1 ms ≤ 1 ms ≤ 1 ms ≤ 2 ms ≤ 2 ms ≤ 2 ms
Supplemental Characteristics
Non-warranted characteristics determined by design
that are useful in applying the product)
Output response time
(settle to within ±1.0% of the
rated output, with a resistive load)
Up, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.25 s
Down, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.30 s
Down, no load 1.1 s 1.2 s 1.5 s 2.0 s 3.0 s 4.0 s
Remote sense compensation
Volts/load lead 3 V 4 V 5 V 5 V 5 V 5 V
Output ripple and noise
2
CC rms 38 mA 29 mA 23 mA 18 mA 13 mA 8 mA
Programming resolution/
measurement resolution
Voltage 7.2 mV 9.6 mV 12 mV 18 mV 36 mV 72 mV
Current 1.5 mA 1.14 mA 0.9 mA 0.6 mA 0.3 mA 0.156 mA
Notes:
1
Time for output voltage to recover within
0.5% of its rated output for a load change from
10 to 90% of its rated output current. Voltage
set point from 10% to 100% of rated output
2
From 5 Hz – 1 MHz, at 10% to 100% of output
voltage at full load (for 6 V units from 33% to
100% of output voltage)