User`s guide

Key Reference 4
N9320A Spectrum Analyzer 99
MODE
Selects the measurement mode of your analyzer.
Spectrum Analyser mode is the default mode and is for general
purpose measurement use. .
Spectrum
Analyzer
Selects the spectrum analysis measurement mode for your
analyzer.
Key access:
Trackin g
Generator
Accesses the tracking generator functions. (Option TG3)
Key access:
MODE
Amplitude TG
On Off
Activates (On) or deactivates (Off) the output
power of the tracking generator. The power
level can then be adjusted using the numeric
keypad, arrow keys or knob. Pressing any
digit, 0 through 9, on the numeric keypad
brings up the selected terminator menu. The
output level range is –30 dBm to 0 dBm.
Key access:
> Tracking Generator
Attenuation Allows you to set the output attenuation
level of the tracking generator in the inner
attenuator. The available level is 0 to 30 dB
in 6 dB steps.The default setting is 18 dB.
Key access:
> Tracking Generator
Amptd Offset
On Off
Amptd Offset (On) allows you to offset the
displayed power of the tracking generator.
Using the amplitude offset capability of the
tracking generator allows you to take system
losses or gains into account, thereby
displaying the actual power delivered to the
device under test.
Key access:
> Tracking Generator
MODE
MODE
MODE
MODE