User`s guide

Getting Started 2
N9320A Spectrum Analyzer 21
Check for Instrument Messages
The spectrum analyzer has two categories of instrument
messages: error and warning messages. A error message is
triggered by operation errors, for example, setting conflicts
or data input is out of the range of a parameter. An warning
message mainly is triggered by hardware defects which could
result in damage to instrument.
Here are some tips to check the instrument messages.
1 Check the display to see if any messages display in the
status bar. Press > More > Show Errors to review each
messages. Please refer to Chapter 6, “Instrument Messages”
for detailed system messages descriptions.
2 When you have reviewed and resolved all of the error
messages, press > More > Show Errors > Clear error queue to
delete the messages.
3 Cycle the power on the analyzer and then check again if the
Instrument messages is still there.
4 If you can not resolve all error messages, please contact
Customer Contact Center for service.
Preset/
System
Preset/
System