User`s guide

40 N9320A Spectrum Analyzer

3 Functions and Measurements

Press

> Mkr -> CF

5 Reduce the span to 500 kHz, if necessary re- center the peak:

Press > 500 > kHz

6 Set the attenuation to 20 dB:

Press > Attenuation > 20 > dB

Figure 10 A signal closer to the noise level

Note that increasing the attenuation moves the noise floor

closer to the signal level.

7 To view the signal more clearly, set the attenuation to 0 dB:

Press > Attenuation > 0 > dB

Figure 11 Measuring a low-level signal using 0 dB Attenuation

Peak

Marker

SPAN

Amplitude