User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
6 SCPI Command Reference
134 N9340A User’s Guide
INSTrument Subsystem
This subsystem includes commands for querying
and selecting the instrument measurement mode.
Select One button measurement
:INSTrument:MEASure OFF|CHPower|ACPR|OBW
:INSTrument:MEASure?
Selects the one- button measurement among
channel power, adjacent channel power ratio, and
occupied bandwidth.
Use this command to select a power measurement
first, then use other commands to set the
parameters of this power measurement.
*RST State: Off
Key Access: [MEAS]