User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
SCPI Command Reference 6
N9340A User’s Guide 141
[:SENSe]:BANDwidth Subsection
Resolution Bandwidth
[:SENSe]:BANDwidth|BWIDth[:RESolution] <freq>
[:SENSe]:BANDwidth|BWIDth[:RESolution]
?
This command specifies the resolution bandwidth.
Resolution Bandwidth Automatic
[:SENSe]:BANDwidth|BWIDth [:RESolution]:Auto
OFF|ON|0|1
[:SENSe]:BANDwidth|BWIDth
[:RESolution]:Auto?
This command couples the resolution bandwidth to
the frequency span. Auto- couple resolution
bandwidth is not available in zero span.
Video Bandwidth
[:SENSe]:BANDwidth|BWIDth:VIDeo <freq>
[:SENSe]:BANDwidth|BWIDth:VIDeo?
This command specifies the video bandwidth.
*RST Value: 1 MHz
Range: 30 Hz to 1 MHz
Available Unit: Hz, kHz, MHz, GHz
Key Access: [BW/SWP] > {RBW}
*RST State: On
Key Access: [BW/SWP] > {RBW}
*RST Value: 1 MHz
Range: 3 Hz to 1 MHz
Available unit: Hz, kHz, MHz, GHz
Key Access: [BW/SWP] > {VBW}